Barko 80XLE

Barko 80XLE

Need to extend your reach? Then the 80XLE is just right for you. It offers a telescoping boom to increase your reach up to 3 additional feet (36"). But this is even better - The Barko 80XLE Back of Cab knuckleboom loader (material handler) delivers the highest payload with the lowest installed weight ratio. And like all Barko products, it provides increased work productivity and the lowest total cost of operation than any other product on the market.

Equipped with more standard features than its competitors, the 80XLE lasts longer, performs harder, and delivers the results you expect. Nothing performs like a Barko. And once you buy one, you'll never want anything else!

Learn more about the 80XLE at | Download the Barko 80XLE Spec Sheet


Max Lift Capacity

Radius Lift
5' (1.52 m) 10,450 lbs. (4,740 kg)
10' (3.05 m) 9,540 lbs. (4,327 kg)
15' (4.57 m) 6,370 lbs. (2,889 kg)
20' (6.10 m) 4,670 lbs. (2,118 kg)
Full Reach 1,250 lbs. (566 kg)
22' 0" (6.70 m) - 25'0" (7.62)
telescoping boom, less attachment

Boom Data

22' 0" (9.75 m)
Main 12' 0" (3.66 m)
Stick 10' 0"
     to 13' 0"
(3.05 m)
(3.96 m)
22'0" (6.70 m) - 25'0" (7.62 m)
telescoping boom lengths

Boom Reach

32' 0" (9.75 m)
Horizontal from center line of rotation" 24' 10" (7.57 m)
Vertical when mounted on a 44' truck frame 37' 3" (11.35 m)
22'0" (6.70 m) - 25'0" (7.62 m) telescoping boom (at full length)

Boom Structure

  • Fabricated box style design with all welded construction and wear plates
  • Aluminum bronze bushings with grease grooves at boom pivot points
  • 2-55W Halogen Work Lamps on Stick Boom


  • Hydraulic cylinders with spherical bearings and wear rings on glands and pistons for long wear
  • All cylinders are made of heavy wall honed steel tubing. Heat treated cylinder rods have heavy chrome plating
  • Main and stick boom cylinders have induction hardened rods and bolt on glands
  • Main Boom cylinder: 5' x 36" (127mm x 914.4mm) with 3 (762.0mm) rods.

Power Source

  • Customer supplied Power Take Off

Hydraulic System

  • 45 gallon (170 L) hydraulic reservoir with both suction and return line filters
  • Pump: One triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1500 RPM
  • Heavy-wall tubing and 4 wire hose throughout system
  • Main system operating pressure 3200 PSI (220 BAR)
  • Independent swing circuit
  • Rotary 5 port manifold to allow continuous rotation

Independent Swing Circuit

  • Heavy-wall tubing and 4-wire hose throughout system
  • Main system operating pressure 3200 PSI (220 BAR)
  • Rotary 5 port manifold to allow continuous rotation

Swing System

  • Continuous rotation with 43" (1,092 mm) external tooth turntable bearing powered by a hydraulic motor and a single stage planetary gearbox

Operator's Platform

  • Rotating platform with beneath-the-seat style valve mounting and foot swing pedal
  • Comfortable, locking, fold-down seat with arm rests
  • 8-Pass electrical collector


  • Telescopic stabilizers with 43" (1,092mm) stroke cylinders enclosed in tubular and fabricated box style assembly with wear plates
  • Controlled from platform or ground

Mounting Data

  • Mounting bolts and support plates are supplied


  • Weight: Loader, with telescoping boom with cylinders (excluding grapple and options): 5,985 lbs. (2,115 kg)
  • Dual ladders with non-slip treading
  • Load securing posts


  • Spacers to accommodate various frame heights
  • Oil Cooler Kit with 12V Fan