Barko Cone Head Chippers

Barko's Biomass Chippers with Cone Drum Technology carry an advanced design unmatched in cutting efficiency. With your choice of a 520 or 800 HP Cummins Turbo Diesel engine, the Barko Biomass Chippers are tough enough to handle any chipping or shredding job. The long 10 ft long Infeed Table provides plenty of safe loading room and the patented ConeHead drum technology ensures that your money is being saved on every load due to its efficient design.

Learn more about the Cone Head Chippers at www.barko.com

THE BENEFITS OF BARKO

The ConeHead® drum provides a wider throat opening that makes fast work of big jobs. Large ‘blades’ on the drum ends actually throw chips forcefully into collection trucks packing in more material for increased efficiency and productivity. Slicing cuts make chips of twigs, branches, vines and leaves more effectively than a regular drum or disc machine. The DisCone™ drum is uniquely able to slice the most difficult material such as vines, heavy stems and thick green succulent leaves. The DisCone uses broad paddles on a large diameter drum to throw large amounts of material from the discharge chute, even when wet and heavy. The DisCone combines the wide throat of drum chipping with the superior throw of a chipping disk. DisCone or ConeHead - - Only Barko has Cone Drum Technology, a true Barko Advantage!

Barko CH885

The CH885 is an ultra-high capacity whole tree chipper; a giant step forward in drum chipper design. The drum is 54" tall, 53" wide, with a 1" thick drum surface, and warranted against material and workmanship failure for 5 years. The sloped infeed chain carries limbs, tops and full trees reliably to 3 feedwheels - 2 vertical and 1 large horizontal. The feedwheels snap forks and guide even unruly material into the oversized drum chamber with little or no attention from the loader operator.

With a Cummins QSK 19L Tier3 800 hp diesel, the CH885 gobbles large quantities of limbs and tops quickly €“ keeping your trucks rolling and letting the loader re-focus on roundwood quickly. The top feedwheel is ballasted with hydraulic down pressure assist at a push of a button on the remote control.

For high production, the CH885 long life, low maintenance and high uptime biomass chipper is your best option. Solid construction and fast, easy maintenance translate to high uptime and longevity that will support your bottom line!

Infeed

  • 11’ 7” L x 8’ 5” W (3.53m x 2.56m), 4 infeed chains, WDH110 built-up drive links
  • 2 vertical feedwheels 9” (23cm) dia x 34” L (86cm), hydraulic drive
  • 1 horiz feedwheel 32” (81cm) dia x 60.5” (154cm) L, ballasted, spring down pressure and hydraulic down pressure assist, hydraulic drive
  • Bed is bolt-in for quick replacement when worn
  • Throat bottom & sides bolt-in for fast replacement

Drum & Chamber

  • Cone drum directs chips to end of drum; more chips are thrown by large paddles on end of drum instead of knives; packs 1 more ton into vans than flat faced drums
  • 16 knives in pockets, pockets are integral to internal drum structure
  • Drum shaft 6” dia, fully machined, superior strength alloy
  • Hinged belly pan assembly - swings down for easy access
  • Bottom pans bolt-in - quick replacement when needed

Discharge

  • Four-way chute tip directs chips hydraulically
  • Low profile chute maximizes velocity & minimizes wear
  • Chute wear surfaces bolt-in, including chute top

Power Train

  • Cummins QSK 19L Tier3 diesel 800hp, standard
  • Microprocessor controlled hydraulic clutch in oil, standard
  • 8V sheaves, 3 six banded belts
  • Full function remote control, standard
  • Autofeed with adjustable settings, standard

Warranty Description

  • Five year drum warranty against defects in materials & workmanship
  • One year machine warranty
  • 8V sheaves, 3 six banded belts
  • Full Engine Manufacturer Warranty
  • See dealer for written Warranty

Download the CH885 Spec Sheet

Barko CH6025

The CH6025 is rugged and powerful, a whole tree chipper with a distinct mechanical advantage - a patented drum design. Dynamic's exclusive Cone Drum Technology slices chips using less energy per cut, 30% to 40% less energy than traditional "flat faced" drums found in every other drum chipper.

A wide 34" by 22" high actual cutting space gobbles large amounts of limbs and tops to be chipped quickly for high production - keeping your trucks rolling and getting the loader back to roundwood quickly. Remote grease zerts and bolt-in replaceable wear surfaces ease service, reducing maintenance time and maximizing uptime.

Triple feedwheels funnel disorderly limbs & tops into cutting chamber, minimizing loader operators time and attention devoted to feeding. You need a long life, low maintenance and high uptime biomass chipper. Solid construction and fast, easy maintenance translate to uptime and longevity that supports your bottom line!

Infeed

  • 10’ L x 7’3” W (3m x 2.21m), 3 infeed chains, WDH102 built-up drive links
  • 2 vertical feedwheels 16” (42cm) dia x 30” L (76cm), hydraulic drive
  • 1 horiz feedwheel 22” (56cm) dia x 32.5” (83cm) L, ballasted, spring down pressure and hydraulic down pressure assist, hydraulic drive
  • Bed is bolt-in for quick replacement when worn
  • Throat bottom & sides bolt-in for fast replacement

Drum & Chamber

  • Cone drum directs chips to end of drum; more chips are thrown by large paddles on end of drum instead of knives; packs 1 more ton into vans than flat faced drums
  • 8 knives in pockets, pockets are integral to internal drum structure
  • Drum shaft 5” dia, fully machined, superior strength alloy
  • Hinged belly pan assembly - swings down for easy access
  • Bottom pans bolt-in - quick replacement when needed

Discharge

  • Four-way chute tip directs chips hydraulically
  • Low profile chute maximizes velocity & minimizes wear
  • Chute wear surfaces bolt-in, including chute top

Power Train

  • Cummins QSX 15L Tier3 520hp diesel, standard
  • Microprocessor controlled hydraulic clutch in oil, standard
  • 8V sheaves, 3 six banded belts
  • Full function remote control, standard
  • Autofeed with adjustable settings, standard

Warranty Description

  • Five year drum warranty against defects in materials & workmanship
  • One year machine warranty
  • 8V sheaves, 3 six banded belts
  • Full Engine Manufacturer Warranty
  • See dealer for written Warranty

Download the CH6025 Spec Sheet