ITI Chip Trailers

ITI Chip Trailers

You will maximize your profit potential with Innovative Trailers chip trailers. The Foundation is a cutting edge design that maximizes structural strength while minimizing trailer weight. Utilizing premium quality components and materials, ITI's veteran work force builds every chip trailer to deliver year upon year of dependable service with little profit-robbing time spent in the shop. The result is a maximum return on your investment. And if you ever decide to replace your ITI, you will be delighted at how well it has retained its value.

For more information about ITI Trailers at www.ititrailers.com

 
DCS Chip Trailer

Capacity

3,834 cubic feet (142 cubic yards)(19.1 units), water level.
 

Dimensions

48’ Length, 102” Width, 13’6” Height (based on 50” Fifth Wheel height), 36” Rear Axle location, 37” King Pin setting, 42’1” King Pin to Rear Axle, 35’ Landing Gear to Dump Blade, and 18” Ground Clearance.
 

Weight

Approximately 11,188 lbs. +/- 3%.

Side Walls

.063 stressed aluminum mill finished skins, with exterior 6061-T6 aluminum aero posts on 21 ½” center with ¼” diameter sidewall rivets on 4 1/2” centers. Heavy-duty side posts in drop area.

Top

Open Top, single center tie design with front and rear diagonal bracing with aluminum top rail gussets.

Front

45-degree front corners with interior front posts.

Floor

.063 corrugated aluminum “V-Groove”.

Rear Door

Side hinge, skinned with expandable metal.

King Pin

Standard SAE heat-treated, 37” setting.


Download the ITI DCS Brochure

 
Inwoods Closed Top Chip Trailer

Capacity

2,738 cubic feet (101.4 cubic yards), water level.
 

Dimensions

43’ Length, 8’ Width, 13’6” Height (based on 51” Fifth Wheel height), 28” Rear Axle location, 37” King Pin setting, 36’9” King Pin to Rear Axle, 32’2½” Landing Gear to Bumper Blade
 

Weight

Approximately 10,625 lbs. +/- 3%.
 

Side Walls

.063 stressed aluminum mill finished skins, with exterior 6061-T6 aluminum aero post on 21½” center, Skins lapped inwoods style and sidewall rivets on 4 1/2” centers. Six (6) inwoods vents, three (3) per side.

Top

Closed top, inwoods design with 48” wide, and 24-gauge stainless steel chip deflector.

Front

90-degree front corners with interior front posts. Interior lined with .063 aluminum.

Floor

.063 corrugated aluminum with wood brake strips.

Rear Door

Aluminum top hinge, 2/3 door for inwoods operation, skinned with pre-paint black skins.

King Pin

Standard SAE heat-treated, 37” setting, 51” height, ½” king pin plate and lifting eye

Download the ITI Inwoods Brochure

 
SDS Open Top Chip Trailer

Capacity

2,750 cubic feet (101.8 cubic yards) (13.7 units), water level.

Dimensions

42’ Length, 96” Width, 13’6” Height (based on 50” Fifth Wheel height), 36” Rear Axle location, 37” King Pin setting, 39’1” King Pin to Rear Axle, 34’2½” Landing Gear to Dump Blade.
 

Weight

Approximately 9,650 lbs. +/- 3%

Side Walls

.063 stressed aluminum mill finished skins, with exterior 6061-T6 aluminum aero post on 21½” centers and ¼” sidewall rivets on 4½” centers.

Top

Open top, single tie design with front and rear diagonal bracing and aluminum top rail gussets.

Front

45-degree front corners with interior front posts.

Floor

.063 corrugated aluminum “V-Groove”.

Rear Door

Side hinge, skinned with expandable metal.

King Pin

Standard SAE heat-treated, 37” setting.


Download the ITI SDS Brochure