Pitts-Trailers-Lowboy

Pitts Trailers LB35-22DC

For more information about Pitts Lowboys visit Pitts Trailers at www.pittstrailers.com
Download the LB35-22DC Brochure

 
STANDARD EQUIPMENT

MAIN BEAMS

Main longitudinal members fabricated with 100 KSI yield steel flanges with 50 KSI yield webs

CAPACITY

35 tons in 12’ length (GAWR and tire ratings determine legal payloads)
35 tons in 16’ length 3+1 closed or spread axle couple configuration

Estimated Tare weight (std package)

16,200 lbs ± 3%

LOAD BASE

12’ rigid point load centered in deck

DIMENSIONS

Overall: 8’ 6” width x 51’ length
Clear deck length: 25’, (flat deck)
Deck height under full load: 22” (ground clearance: 6”)
50” nominal loaded 5th wheel height (4 ride height positions)
Rear bogie height: 41”

GOOSENECK DESIGN

Hydraulic, detachable with 8” cylinders, non ground bearing, set up for wet line
Adjustable ride height features 4-position mechanical lock for separate deck and fifth wheel height control
84” swing radius

DECK DESIGN

Level deck design
1 1/2” nominal apitong (side rails only)
Front of deck sloped and features traction cleats
Lockable toolbox in front of deck
Removable swing-type outriggers (extends trailer width 2’)

BOGIE DESIGN

Fixed deck-to-bogie connection with front bogie ramp
V-style boom trough
Recessed load bearing bolsters between axles and behind last axle
Heavy-duty V-style rear bumper
Available third flip axle setup

AXLES

(2) Heavy-duty axles with 49” spread
25,000 lbs nominal capacity per axle (GAWR determined by suspension type, brakes, tires and other components)
Tapered spindle axles

BRAKES

16 1/2” x 7”
Heavy-duty brake drums, outboard mount
Automatic slack adjusters
Type 30/30 parking brakes on (2) axles

HUBS

Hub-piloted 10-stud mount
Outboard cast drums

WHEELS/TIRES

(8) Steel disc wheels 8.25 x 22.5 with 275/ 70R 22.5 H-ply tires

SUSPENSION

Unitized heavy duty 25,000 lbs, air-ride suspension with automatic and manual controls
Suspension override prevention straps on all axles

ELECTRICAL SYSTEM

Fully sealed wiring harness with LED lights
Marker lights and mid-turn signals
(3) Oval stop, tail and turn lights per side on rear

PROTECTIVE COATING

High quality 2-part polyurethane enamel
High quality 2-part primer
Blasted and cleaned prior to painting

LASH RINGS

8) Pair (16 total), bent D-ring

FLAG HOLDERS

(2) Pair (4 total)