Landoll Detachable Trailer Lineup

825-AG

The 800 frame design features a flat deck with a loaded height of 17” off the ground. Coupled with a low tare weight, the 825 can haul the latest combines, tillage, haying equipment and planters with up to 32′ of usable deck space.

835-AG

The 835 Series Ag Detachables are designed with an innovative four-beam frame and gooseneck which give the operator versatility required to safely load and legally transport today’s heavy, wide and tall equipment. The 835 can be a rigid 3-axle or be equipped with an optional flip third axle.

835

Drivers need flexibility while loading. With bigger equipment, it’s necessary to make loading onto the lower deck trouble-free. From a clean assist ramp for larger equipment to the fully Hydraulic Power Ramp loading forklifts, pavers and rollers, Landoll gives you the ability to load just about anything just inches from the ground.

840-AG

With a capacity to handle up to 40 tons, it ensures you can transport your heaviest machinery and bulkiest equipment with ease. Built to last with durable materials and advanced engineering, our 40-ton detach ag trailer is the ultimate trailer for maximizing productivity and efficiency on the farm.

845-AG

Most 2-axle base trailers run out of GVWR to legally permit many heavier loads. The Landoll 845 tops out at 116,500 lbs. / 51,076 KG GVWR allowing for a full 90,000 lbs. of payload. The trailer equipped with the gooseneck extension and the third flip axle will scale even the toughest ag tractors. Each state DOT controls the exact weights you can transport on their highways.

850XT

The 850XT shares features from the current Landoll 800 series and provides loadable low deck height all the way to the rear bumper. Having ride height adjustments in the gooseneck and rear trunnion, provides much needed compliance on the job site. Staying with the industry’s easiest gooseneck attachment, getting those challenging loads doesn’t seem challenging anymore.

855

Landoll’s patented neck has a single hydraulic function. It uses one hydraulic lever to fully detach and carry the neck away from the lower deck. Reconnecting is just as easy. Back up and the alignment wedge centers the neck and the “A” frame load carrier relocks the lower deck and lifts the trailer to transport position. Choose one of seven ride heights to adjust to the proper transport position.

860

The Landoll 860’s versatility originates in its primary standard features. The innovative 4-beam frame features a loaded height of 19-1/2″. The 860 is a 3-axle trailer frame with standard hinge brackets and hookups for an additional flip axle or a Nitrogen Stinger / Spreader Bar.