Home    |     Locations    |         |     Contact Us    |    Waters University    |     Careers    |     Credit App
Home    |     Locations    |     Contact Us    |    Waters University    |     Careers    |     Credit Application
662-289-6031 662-289-6031
KOSCIUSKO, MS
662-328-1616 662-328-1616
COLUMBUS, MS
(TRUCK & TIRE)
601-544-7401 601-544-7401
HATTIESBURG, MS
601-445-8850 601-445-8850
NATCHEZ, MS
662-328-1575 662-328-1575
COLUMBUS, MS
601-693-4807 601-693-4807
MERIDIAN, MS
Broken down? Need a Wrecker?
Call
662-251-3905 (COLUMBUS)
or 662-739-1520 (KOSCIUSKO)

Barko 80XLE Back of Cab Loader

THE BENEFITS OF BARKO

From the first high-capacity loaders, to Barko’s proprietary load sensing hydraulics system, Barko has consistently led the industry with innovative solutions to the forestry, scrap, construction and industrial markets. Backed by the industry’s best engineering team, Barko’s goal is to develop even better solutions to your everyday operations, helping you get the job done right more efficiently and more effectively than ever before.

Barko’s back of cab knuckleboom loaders combine low installation weight with high payload capacity, resulting in maximum productivity for all your material handling needs. Loaded with standard features, these efficient units offer a high level of performance at a low total cost of operation.

Equipped with a telescoping boom that increases reach by up to 3 additional feet, the Barko 80XLE back of cab knuckleboom loader delivers an excellent power-to-weight ratio. Its maximum front lift capacity is 10,450 pounds.

Download the Barko 80XLE Brochure   Learn more about the 80XLE at www.barko.com

DIMENSIONS

A-Frame Width 25.625″ (65 cm)
A-Frame Height 5′ 3″ (158 cm)
Stabilizer Width 10′ 3″ (312 cm)
Total Operating Weight 5,985 lbs (2,715 kg) loader with telescoping boom with cylinders (excluding grapple and options)
Additional Dimensions Download spec sheet for additional product dimensions

TRAILER/TRUCK MOUNT

Stabilizers Telescopic stabilizers with 43″ (109 cm) stroke cylinders enclosed in tubular and fabricated box style assembly with wear plates

POWER

Source Customer supplied power take-off

HYDRAULICS

Tank 45 gal. (170 L) with suction and return line filters
Pump Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM Triple gear pump producing 26/21/15 GPM (98/79/57 LPM) at 1,600 RPM
Operating Pressure 3,200 psi (220 bar) main system
Valves Sectional control type with mechanical joysticks
Features Heavy-wall tubing and 4-wire hose; independent swing system with direct-linked foot controls, rotary manifold to allow continuous rotation

BOOM

Structure All-welded construction with fabricated box type design; aluminum bronze bushings with grease grooves at boom pivot points
Standard Boom 22′ to 25′ (671 to 762 cm) telescoping
Horizontal Reach 24′ 10″ (757 cm)
Vertical Reach 37′ 3″ (1,140 cm) from ground when mounted on 44″ (112 cm) truck frame
Cylinder Features Hydraulic cylinders with spherical bearings and wear rings on glands and pistons; heavy wall honed steel tubing; heat-treated cylinder rods with heavy chrome plating; induction hardened rods and bolt-on glands
Main Boom Cylinder 5″ x 36″ (127 x 914 mm) with 3″ (76 mm) rod
Stick Boom Cylinder 5″ x 30″ (127 x 762 mm) with 2.5″ (63.5 mm) rod
Maximum Lift Capacity (25′ Boom) (25′ Boom) 10,450 lbs (4,740 kg) with 5′ (1.5 m) radius
9,540 lbs (4,327 kg) with 10′ (3.0 m) radius
6,370 lbs (2,889 kg) with 15′ (4.6 m) radius
4,670 lbs (2,118 kg) with 20′ (6.1 m) radius
1,250 lbs (566 kg) at full reach

SWING SYSTEM

Rotation Continuous rotation on 27″ (686 mm) external tooth turntable bearing, powered by hydraulic motor and single stage planetary gearbox

AVAILABLE OPTIONS

  • Spacers to accommodate various frame heights
  • Oil cooler kit with 12-volt fan
  • Left hand platform
  • 55W halogen work lamps